• Datasheet (in English)
• Distribution Patterns

Description

The Reliable Model G6-56 Concealed Quick Response Sidewall Standard Spray Sprinkler is an attractive, concealed sprinkler assembly that utilizes a push-on/pull-off cover plate assembly. The sprinkler assembly is shipped with a protective cap. The flat cover plate is attached to the skirt using 135°F (57°C) ordinary temperature classification solder. The sprinkler is easily installed into the sprinkler fitting using the Model G6 Sprinkler Wrench. When the ambient temperature rises, the solder holding the cover plate melts, allowing the release of this part and thus exposing the sprinkler inside to the rising ambient temperature. The Model G6-56 utilizes a Quick Response soldered link. This quick response enables the sprinkler to apply water to a fire sooner than standard response sprinklers of the same temperature rating. This sprinkler is listed for a maximum service pressure of 175 psi (12,0 bar).

Installation

Sprinklers installed 66.7 mm in diameter into the hole Reliable Model G6 -nozzle wrench. Tight connection is obtained by tightening the sprinkler torque of 11-24 Nm. Do not tighten the sprinklers above the recommended torque. The documented higher torque will not improve sealing, it can in fact cause leaks and damage the sprinkler. Sprinklers have a protective cap to protect it during the transportation and installation. Leave the cap in place during plastering walls, wallpapering or painting, and remove it only in connection with the cover installation.The protective cap must be removed and the listed cover plate installed prior to the sprinkler system being placed in service

Features

1. Flat Cover Plate (Solid or Perforated)
2. K-value 80
3. Quick Response (HSW standard spray)
4. 6,3 cover plate adjustment.
5. Cover plate available, either solid or perforated, in a wide variety of colors and finishes.

Approval Organizations

1. Listed by Underwriters Laboratories Inc. and UL certified for Canada (cULus).