Description
Grooved mechanical tees are used to create a grooved outlet from the pipe. Two pieces can also be converted into a cross. Sizes available with grooved outlet are DN50x32-DN200x80. Pressure class PN20 (Note! The maximum permissible pressure class rating with NordicFlow Thin Wall Pipes is PN16).
Material Specification
Body: Ductile cast iron ASTM A536 65-45-12
Coating: Red paint RAL 3000 or hot-dip galvanized
Gasket: Rubber gasket EPDM, working temperature range -34°C – +110°C
Bolt & Nut: Lock cap screw, medium carbon steel, electroplated, strength class 8.8
DN | Dy (mm) | L (mm) | H (mm) | W (mm) | Φ (mm) | Hole cut (mm) | Bolt | Torque (Nm) | Weight (kg) |
50×32 | 60,3×42,4 | 120 | 70 | 72 | 85 | 46+1 | M10x50 | 44-54 | 0,91 |
50×40 | 60,3×48,3 | 120 | 70 | 79 | 85 | 46+1 | M10x50 | 44-54 | 0,94 |
65×32 | 76,1×42,4 | 139 | 73 | 72 | 99 | 46+1 | M10x60 | 44-54 | 1,02 |
65×40 | 76,1×48,3 | 139 | 75 | 79 | 99 | 53+1 | M10x60 | 44-54 | 1,07 |
80×32 | 88,9×42,4 | 155 | 82 | 72 | 113 | 46+1 | M10x60 | 44-54 | 1,12 |
80×40 | 88,9×48,3 | 155 | 82 | 79 | 113 | 53+1 | M10x60 | 44-54 | 1,14 |
80×50 | 88,9×60,3 | 155 | 82 | 90 | 113 | 64+1 | M10x60 | 644-54 | 1,35 |
100×32 | 114,3×42,4 | 181 | 95,5 | 72 | 139 | 46+1 | M12x70 | 90-100 | 1,37 |
100×40 | 114,3×48,3 | 181 | 95,5 | 79 | 139 | 53+1 | M12x70 | 90-100 | 1,41 |
100×50 | 114,3×60,3 | 181 | 95,5 | 90 | 139 | 64+1 | M12x70 | 90-100 | 1,53 |
100×65 | 114,3×76,1 | 181 | 99 | 117 | 139 | 70/80+1* | M12x70 | 90-100 | 1,86 |
100×80 | 114,3×88,9 | 181 | 96 | 130 | 139 | 89/92+1* | M12x70 | 90-100 | 2,04 |
125×50 | 139,7×60,3 | 212 | 110 | 90 | 167 | 64+1 | M12x75 | 200-230 | 1,96 |
125×65 | 139,7×76,1 | 212 | 113 | 117 | 168 | 70/80+1* | M12x75 | 200-230 | 2,22 |
150×32 | 168,3×76,1 | 248 | 125 | 72 | 194 | 46+1 | M16x85 | 200-230 | 2,51 |
150×40 | 168,3×76,1 | 248 | 125 | 79 | 194 | 53+1 | M16x85 | 200-230 | 2,53 |
150×50 | 168,3×76,1 | 248 | 126 | 90 | 194 | 64+1 | M16x85 | 200-230 | 2,54 |
150×65 | 168,3×76,1 | 248 | 127 | 117 | 194 | 70/80+1* | M16x85 | 200-230 | 2,87 |
150×80 | 168,3×88,9 | 248 | 127 | 136 | 194 | 89/92+1* | M16x85 | 200-230 | 3,00 |
150×100 | 168,3×114,3 | 248 | 127 | 162 | 194 | 111/114+1* | M16x85 | 200-230 | 3,47 |
200×65 | 219,1×76,1 | 311 | 154 | 117 | 248 | 70/80+1* | M16x85 | 200-230 | 3,68 |
200×80 | 219,1×88,9 | 311 | 154 | 136 | 248 | 89/92+1* | M16x85 | 200-230 | 3,88 |
* Note! There can be two variations in stock. Always make sure you have the correct hole saw before drilling pipe.